|
F.A.Q
1) Can the TA'70/100/THE1492 amplifiers
work in mono?
"Mono" could mean three different scenarios:
1. Feed a signal on the mono input only, thus having the same sound on
both channels, with independent amp final sections and two cabinets.
2. Use of one channel only, leaving the other one unused.
3. Feed a signal on the mono input only, and bridging the two final amp
sections.
In case 1 the answer is yes: the amp is connected just like in stereo
mode, you only use the mono input.
In case 2 the answer is yes, BUT it is mandatory to keep the unused channel
in Stand-by mode and with the output level at zero. When the channel is
in stand-by position a load is not required on the output.
In case 2 the answer is no: because of its construction scheme, these
kind of amps cannot be bridged. An attempt to bridge the channels can
lead to severe damage to the tubes and to the transformers.
2) Can THE MISSING LINK be used as a preamp?
TML only accepts low impedance signals (from preamps, efx processors...),
it isn't designed to handle hi-impedance signals (e.g. from pickups).
3) Does CML3 work on batteries?
CML3 works only in connection to THE MISSING LINK vintage/custom/limited
series ( ser.num .AD0998ML1001 and later) from which it is powered.
Support
and products guarantee 
Repairs are made exclusively in our own laboratories.
ADVANCE products are covered by one year guarantee, from purchase date.
-Guarantee
The device must be shipped to our laboratories. The shipping costs must
be paid by the customer.
After the repair the device will be shipped back, with no shipping costs
for the customer.
All replaced parts and testing are included in the guarantee.
Tubes are not covered by the guarantee, except if manufacturing defects
are detected in tests.
-Repairs (after guarantee expires)
The device must be shipped to our laboratories.
The shipping costs to and from our labs must be paid by the customer.
Testing and replaced parts are charged on the customer.
P.S.
Parts damaged during shipping form and to our laboratories are
not covered by the guarantee; it is recommended to insure the items shipped
and to pack carefully the devices to protect them from shocks or humidity.
|
