S512 MIDI SWITCHER
Quadruple MIDI switcher
Connections and characteristics
S 512 MIDI SWITCHER , works as four indepentent switches that can be activated with MIDI program changes sent by a MIDI device (footswitches, computer, sequencer,ecc. ).
The settings of the switches can be stored in internal memory with an quick and easy procedure.
4 SWITCHES
(NORMAL USE)
Jack to jack ¼” mono cables are used.
The device works as 4 independent switches:
selection of the switch closes the connection loop(on state).
4+4 SWITCHES
In this mode, a Y cable (Stereo ¼” jacks on the S512 side, mono jacks on the other) must be used, as shown in the above scheme. This mode sets 4 switches "ON" and 4 switches "OFF".
By using this configuration you can simultaneously turn on a device while turning off the other one.
Because one pole of the switch is shared, please check that all the devices to be used support this type of connection to ensure flawless operation.
IMPORTANT !!!
Please refer to a qualified tecnician for the soldering of Y cables used in 4+4 mode.
S 512 is a device switcher and should NOT to be used
for audio signals (A/B switch, effect loops.....).
Power and PHANTOM OUT connection
S512 works on 12 V 500mA (AC or DC) power supply.
Power in connector diameter: 2,5mm.
S512 sports a DIN standard 7 pins port, that can be used to power any devices that accept phantom power (footswitches,multieffects...)
Top view
Technical specifications
size: mm. 125 x 132 x 41
weight: gr. 400
power requirement: 12Vcc 500mA
ADVANCE TUBE TECHNOLOGY via Belvedere, 24 - 21020 GALLIATE LOMBARDO VA ITALY - TEL/FAX +39 0332 947794
ADVANCE s.n.c. via Verdi, 4 - 21020 TERNATE VA ITALY - Cap. Soc. € 7.746,86 int. vers. / Registro delle Imprese di Varese P.IVA 02309700124
ADVANCE s.n.c. via Verdi, 4 - 21020 TERNATE VA ITALY - Cap. Soc. € 7.746,86 int. vers. / Registro delle Imprese di Varese P.IVA 02309700124